Piping Cantilever Automatic Welding Machine (SAW)

Home » Products » Automatic Pipe Welding Machines » Piping Cantilever Automatic Welding Machine (SAW)
Piping Cantilever Automatic WeldingMachine (SAW)

Characteristics:
1. On-line performance: Excellent (designed for flow process)
2. Application: Used in screen welding (DN≥150)
3. Welding capacity: Excellent (200-300 inch/day, which is over 4 times of manual welding)
4. Operability: Good (easy to operate even if you are a fresher)
5. Surface forming: Excellent (the welding gun will always be positioned in optimum position)
6. Welding qualification Ratio: ≥98%
7. Driving reliability: Excellent (driven by welding positioned)
8. Price: Much cheaper than the automatic pipe welding machines-submerged arc welding

Technical parameter
1. Pipe diameter: DN50-600(φ60-610)
2. Pipe thickness: 3-80MM
3. Pipe materials: carbon steel, alloy steel, stainless steel and cryogenic steel.
4. Welding: tube-tube, pipe-pipe, tube-elbow, tube-flange, flange-flange, flange- elbow (dummy tubes for connection when necessary).
5. Driving system: driven by three-row stainless steel worm -and -worm wheel or driven by two-row rubber roller reducer.
6. Compression system: the height of the compression arm can be adjusted by electric power, and the compression arm can rotate for 180 degrees with the two wheels of manual lead screw.
7. Bracket system: Separate type of trolley matching for Welding Machine, which may be adjusted along the track according to the length of the pipeline.
8. Counterweight system: no Counterweight
9. Speed-regulation mode: Variable-frequency stepless speed control system
10. Adjustment mode: manual cross regulator
11. Control system: products of proprietary technologies owned by our company, no PLC control
12. Welding mode: twin-wire submerged arc welding
13. Welding power: OEM (or as per customers' demands)

Feedback Form
Other Products
  • Pipe Bevel Machining Workstation (G-type)Production capacity: ≤3 Min / pipeline (DN200 SCH40).
    Mobility: Excellent (without limitation of radiation radius by using container as carrier).
    Application:
    Used in groove ...
  • Pipe Bevel Machining Workstation (K-type)Structure: 6 meters container with special technology, cutting bandsaw machine, beveling machine (radial groove face of pipe), cantilever crane.
    Speed: Cutting Speed: ≤2 Min / pipeline, Beveling ...
  • Piping Radiographic Test Workstation Pipe diameter: DN50-600(φ60-610).
    Inspection power: 300KV, 5MA.
    Defectoscopy direction: bottom and around.
    Exposure time: 8 hours/ day, 6 days/ week ...